Alaska’s largest cable company today unveiled changes to its Internet plans, ditching surprise overlimit fees in favor of a speed throttle.

GCI has been the subject of bad press in the past, with some customers experiencing up to $1,200 in overlimit fees after exceeding GCI’s usage allowances. In an effort to avoid public relations nightmares like that, GCI will stop assessing automatic overlimit fees and instead impose a speed throttle on customers over their limit that will temporarily reduce broadband speeds to less than 1Mbps until the next billing cycle begins. Customers can voluntarily pay for more usage in $10 increments, which buys a reprieve from the speed throttle.

GCI “No Worries” Broadband Plans offer varying usage caps and extra usage allotments:

Customers on lower speed plans continue to face a lower usage allowance and will receive considerably less extra data for their $10 add-on data plan. GCI’s highest speed re:D offering does get a bigger usage allowance: 600GB, up from 500GB. An $11.99/mo surcharge continues for broadband-only customers.

GCI’s largest competitor remains telephone company ACS, which heavily markets its unlimited usage DSL plans. Almost as an afterthought, ACS now markets packages that include landline service with unlimited local calling and 180 minutes of long distance for free.

A price comparison between the two providers is somewhat hampered by the fact GCI does not publicize a broadband+home phone bundle package on their website. GCI Home Phone is priced at $19.99 a month.

A 10Mbps unlimited use package from ACS costs $110/month. A 10Mbps plan from the cable company with a 30 40GB allowance + GCI Home Phone costs $79.98. On price, GCI wins at this speed… if you stay within your allowance. A 50Mbps unlimited use package from ACS runs $180 a month. GCI charges $104.98 with 150GB of included usage. Again, the price winner is GCI if you stay within your allowance. Taxes, surcharges and government fees are extra.

Heavier users may find ACS’ initially higher prices worthwhile if they are forced to buy GCI’s add-on data buckets. Both companies charge considerably more than providers in the lower 48 states.

Last year, nearly 10% of GCI’s revenue was earned from automatically applied overlimit fees. Giving up some of that revenue is a concession, but one that is likely to end bill shock and negative media attention. Still, usage allowances remain arbitrary. GCI’s entry level 10Mbps plan only offers a paltry 30 40GB a month — an allowance largely unheard of among other U.S. cable providers. GCI will also have a difficult time explaining why $10 will only offer one customer 5GB of extra usage while others will get up to 30GB. The costs for the additional data to GCI are the same.

Our thanks to an anonymous reader for sharing the news.

Updated 4:08pm EST 1/15: After going to press, GCI changed their website, adjusting the usage allowance for their 10/1Mbps plan to 40GB (up from 30GB) and deleted references to the $11.99 surcharge for broadband-only customers, which apparently no longer applies.

That is DISH’s CEO banging the drum beside a panoply of kangaroos. (Image courtesy: Gizmodo)

The ultra high-definition, bandwidth chewing 4K television standard has arrived and like HDTV before it, the first place most Americans will get to sample the new standard is over satellite television.

DISH Network is planning to introduce HDMI/HDCP 4K television owners to its new 4K Joey this year — a souped-up set-top box that can handle the high demands of 4K video.

DISH is using a Broadcom dual-core chipset and 7448 ARM processor that can handle the next standard in high-definition viewing.

While DISH set-top boxes will be ready for 4K, many cable and DSL broadband networks in the United States will face difficulties handling the online video demands that 4K video will place on their networks. In tests, watching an average movie required a minimum of a maxed out 10Mbps broadband connection. Live programming, particularly sports, required considerably more broadband speed to keep up. Few DSL networks will be able to sustain more than a handful of customers attempting to stream 4K video before neighborhood nodes become overwhelmed. Even the DOCSIS cable broadband standard still relies on shared bandwidth, and a few video aficionados in the neighborhood could pose significant challenges and speed slowdowns for other customers in the area.

Besides satellite, only fiber optic broadband will be ready to handle the practical requirements of streaming 4K video without significant upgrades.

DISH’s plans to stream video content over the Internet could one day also include 4K programming, but viewers are likely to run smack into usage caps and usage billing that ISPs are using to deter online video from gutting cable television revenue as well as further monetizing already highly profitable broadband.

Downloading just three 4K movies consumed 90GB and took more than a day to download, even with Comcast’s 100Mbps broadband service. In usage-capped markets, fewer than a dozen 4K movies would eat your entire monthly allowance. Each additional movie would subject Comcast customers to overlimit fees averaging around $6 per title.

Although DISH will offer a set-top box to handle 4K viewing, content producers are still waiting to see whether the public embraces the next HD standard before investing heavily in programming delivered using the new standard. DISH would only promise content from “several providers” would be forthcoming by the time the 4K Joey is released during the second quarter.

Phillip Dampier

Welcome to 2015!

This is the seventh year Stop the Cap! has fought for better broadband across North America and beyond. Whether your provider is Comcast, Time Warner Cable, Rogers, Bell, AT&T, Verizon or a (dwindling) number of other cable and telephone companies, there is plenty of room for improvement.

When we began in the summer of 2008, Frontier Communications was contemplating a usage cap of just 5GB a month on their broadband service. A year later Time Warner Cable market tested caps as high as 40GB a month. For almost as long as we’ve existed, Comcast has believed 250GB a month was all most customers ever needed. Rogers’ most popular Internet package today offers 60GB a month, despite the fact Canadians on average watch more online video than anyone else. AT&T thinks 150GB a month is fine for DSL and 250GB is all you’d need as a U-verse customer. Verizon doesn’t see a need for limits on either its DSL or fiber optic networks. Neither does Cablevision.

Usage caps and so-called “usage-based billing” continue to be one of the most under-reported stories in the tech press. Touted as “fair pricing,” these plans are in fact little more than profit-padding for a service that already earns companies as much as 90% gross margin. There is nothing fair about usage-based billing in North America. Customers face the same prices they have always paid for unlimited service, but now endure an arbitrary usage allowance that usually includes a stiff overlimit fee. Those providers charging usage pricing do not offer the fastest service, have not made significant improvements above and beyond other providers that still charge flat rate prices, and frequently also charge excessive modem rental fees.

The duopoly most Americans have for broadband service has become quite fat and happy collecting ever-increasing amounts of money for service that only seems to improve after an upstart competitor like Google arrives ready to offer better service at a lower price. Customers in Kansas City, Austin, and a handful of other communities are getting the best upgrades and are empowered to negotiate a lower price for service. The rest of the country is not so lucky. A handful of often-under capitalized fiber competitors have arrived in some areas, but their market share generally remains a fraction of what the cable and phone companies have locked up.

We have always believed broadband was destined to become the next must-have utility service, following clean water, electricity, gas and some form of telephone service. Unfortunately, Washington policymakers continue to treat Internet access as an optional extra, allowing one or two companies to dominate access in most communities. Policymakers and regulators have done very little to protect consumers from the effects of marketplace concentration, allowing cable and phone companies to merge and raise prices, remain uncommitted to protecting the Open Internet with strong Net Neutrality protections, and not taking the effects of usage caps seriously.

One of the most effective ways a community can combat bad service and high prices is to support launching its own public broadband network. Throughout the United States, local town and counties enduring “good enough for you” broadband (or no service at all) are constructing their own fiber optic networks to better meet the realities of the 21st century digital economy. They face industry-funded opposition in at least 20 states where lawmakers have banned or severely curtailed these networks to protect private telecom giants from the effects of serious competition.

In 2015, Stop the Cap! will continue to fight for consumers looking for a better deal:

• We continue to oppose industry consolidation. Mergers and buyouts benefit executives and shareholders. They almost never benefit customers who soon find rate increases, fewer choices, and often worse service as a result. Connecticut residents know that first hand enduring Frontier Communications’ recent bungled transition from AT&T service. Customers that dislike Time Warner Cable will likely loathe Comcast if that merger wins regulator approval. AT&T’s buyout of DirecTV leaves one less competitive choice for customers living in AT&T’s service areas looking for an alternative to U-verse television. Imagine if the government had approved AT&T’s attempted buyout of T-Mobile, the one wireless carrier now willing to throw a monkey-wrench into the current dominance of almost-identical expensive wireless service plans from AT&T and Verizon.
• Usage caps and consumption billing remain unjustified, particularly for wired broadband. Despite industry claims that usage caps and usage billing stimulate investment, in most cases the costs of delivering broadband service and the amounts companies invest in network upgrades continue their relentless decline on a per customer basis. Usage billing is no prescription for congestion problems either. Most congestion problems occur during peak usage levels — when light and heavy users alike are most likely to be online. A truly fair usage pricing scheme would charge a fair price for actual usage and nothing else. But such a pricing scheme would likely cut broadband bills and profits. So providers offer pre-determined compulsory usage allowances at current prices instead, and do not offer a flat rate option or rollover unused usage to a future month. As a result, customers often pay more for less service and constantly have to check their usage to make sure they do not get an unexpected surprise on their bill.
• Strong Net Neutrality protection is the best guarantee of preserving the Internet as it exists today – where success or failure of an online venture is based on what it offers customers, not on the size of its bank account. A nationwide end to laws restricting the development and expansion of community broadband is also essential to give communities self-determination of their broadband future.
• We will continue to educate consumers on how to negotiate a better deal with your provider and avoid expensive surcharges like modem rental fees. We will also continue to enlighten you about the pervasive influence of Big Telecom money on non-profits, state and federal governments, and researchers that support the various agendas of some of the largest telecom corporations in the country.

Broadband is improving at an incredible pace around the world, but back home prices continue to rise while Internet speed improvements are often met by usage cap road bumps. Internet affordability remains as much of a problem as rural broadband access. The more you know, the more effective you can argue for a change in telecom policies, where the public interest is better-balanced against corporate profits and duopoly prices.

Thank you for being a part of our efforts to make things better.

Speed upgrades won’t help Comcast customers if they exceed a market-tested 300GB usage cap that could extend nationwide in 2015. (Image courtesy: “Funch”)

Comcast will double the broadband speeds of many of its broadband customers at no extra charge in the Pacific Northwest and Rocky Mountain region just in time for Christmas.

• Performance will increase from 25Mbps to 50Mbps;
• Blast! will increase from 50Mbps to 105Mbps;
• Extreme 105 (105Mbps) will be replaced with Extreme 150 (150Mbps).
• Certain areas will qualify for new speed plans of 305 and 505Mbps.

The new speeds are planned to begin on Dec. 16 and a modem reset may be required. Comcast indicates the speed increase excludes parts of New Mexico, Tucson, Ariz., and Fort Collins, Col.

These markets are not part of Comcast’s ongoing usage cap market trials testing a 300GB monthly usage cap with a $10 penalty for each 50GB customers exceed their allowance.

Although some customers are pleased about the speed increases, with usage caps potentially looming the benefits may prove fleeting.

One customer who has cut cable television and now streams all of his video entertainment online found Comcast would empty his bank account if the overlimit fee was in place in his area.

“I figured I’d go and see how much data I actually used in those months and found that I used 996GB in September, 706GB in October and 553GB in November,” wrote Funch. For the month of September, he would have owed Comcast an extra $140 in penalties on top of his usual Internet bill thanks to viewing Hulu and Netflix.

Customers in Comcast usage capped markets are turning down the video quality of Netflix to conserve their usage allowance, resulting in degraded video performance.

“They boost their speeds but then charge you more if you actually use them,” said Nashville customer Paul Frankel. “It’s the Comcast way.”

In a complete about-face for eastern Canada’s largest cable operator, Rogers Communications is inviting customers to take the brakes off their usage and go hog-wild with high bandwidth HD streaming and downloading with an unlimited use plan.

“Whether you use shomi^™, Netflix, YouTube or all three as your go-to streaming service(s), if you’re a subscriber to an unlimited Rogers Internet package, you don’t have to worry about streaming video in anything other than their highest-quality settings – the image is pristine and the sound is awesome,” the company writes on its online blog.

Rogers had argued for at least five years before Canada’s telecommunications regulator that compulsory usage caps and overlimit fees were necessary to manage congestion on their networks and to make sure that heavy users pay their fair share.

Those days of congestion are evidently over because Rogers takes customers through several tutorials to teach them how to turn up their streaming settings to deliver HD and 4K video streams.

“Rogers comes very close to implying it is Netflix and YouTube that compromise the video experience of customers, despite the fact Netflix created its user-definable video playback settings precisely to help Canadians manage usage allowances from companies like Rogers,” said online video analyst Rene Guerdat. “It’s clear that competition from independent providers offering unlimited use accounts has made Rogers’ usage cap regime impossible and they were forced to market an unlimited option of their own.”

Here is Rogers’ guide for cranking up the video quality of video streams, useful for anyone else who subscribes to these services as well:

shomi

This new video-streaming service for Rogers Internet or TV customers has three video-quality settings (Good, Better, Best). Each uses different amounts of bandwidth and offers different levels of viewing quality. These settings can be individually changed for each user profile, and can be made only from the Web application via the account holder’s profile.

To check / change your stream settings

1. In a browser, go to shomi.com and log in with your account credentials.
2. Go to the dropdown menu at the top far-right corner of the Web page.
3. Select ‘Manage Account and Profiles.’
4. Select the profile that you want to edit (or create a profile if it is a new profile), and under the ‘Manage Profiles’ menu you’ll see your ‘Max Video Quality’ settings.
5. Click ‘Edit’ and then select the video-quality setting that you want.

Note: These profile settings update all devices except your Rogers cable box (if you’re using one).

Netflix

Netflix has streaming-video playback settings that use less data (in case you have a small monthly data cap). If you’re on an unlimited Rogers Internet package, though, you can get a better experience by streaming at the highest settings. Here’s how.

To check / change your stream settings

1. In a browser, go to Netflix.ca and sign in with your Netflix username and password.
2. If prompted, select the appropriate user profile you want to change.
3. In the top-right corner, click the downward arrow, then click ‘Your Account.’
4. In the Your Profile section, click ‘Playback Settings.’
5. Click the radio button to select the highest-quality streaming setting (‘High’), then click ‘Save.’

This setting will be your new default across all your devices. If you have multiple user profiles under your Netflix account, follow the above process for them, too.

YouTube

YouTube gives you a lot of playback control, and typically does a pretty good job of balancing video quality and connection. However, to ensure you’re seeing the best-quality video possible from YouTube, you can change the settings for the videos you watch. Here’s how.

Play a YouTube video in HD (when available)

1. While playing a video, move your cursor over the player window. Video-player elements will appear.
2. Click the gear icon in the lower right of the player.
3. In the bottom of the pop-over menu that appears, click on the ‘Quality’ option.
4. Select the highest video-quality setting and click it to apply.

Tip: Not all video content that’s uploaded to YouTube is available in full 1080p HD. If no HD option is offered, just choose the highest-quality setting that’s available.

Default to high-quality YouTube playback

Setting default playback behaviour on YouTube requires an account. If you have a Google account (Gmail, Google+, etc.), you already have everything you need.

1. Log in to YouTube using your Google or Gmail account ID.
2. Click on your username and, in the menu that appears, choose the gear icon. If you’re already logged in, click your profile image in the top-right corner to find the gear icon instead.
3. In the left navigation pane, click ‘Playback.’
4. Select ‘Always choose the best quality for my connection and player size.’
5. Click Save in the top right.

Now, YouTube will give you the best-quality video it can, based on the above-mentioned factors. Double-click a video to launch it in full-screen and to get a full-HD version of the video, where available.